CCS Grade B ship plate,CCS Grade B shipbuilding plate

CCS Grade B ship plate,CCS Grade B shipbuilding plate,CCS Grade B steel plate CCS Grade B steel plate is common strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction.Normally when rolling,Air rolled and Control Rolled is ok for ship plate CCS Grade B with the thickness equal and belows 40 Millimeters,and for thickness above 40mm,the heat treatment shall be Normalised or TMCP,these two technical treatment would improve steel strength in yield and tensile points.Low temperature impacting test for CCS Grade B shall be done under zero centigree when rolling. Our mill test certificate for CCS Grade B would be issued under format EN 10204 TYPE 3.2,it would indicate the five main chemical elements contains percentage and mechanical property which including yield strength and tensile strength for sample pieces.Else it should be drafted the impacting temperature and impacting energy value on this mill test certificate.The steel grade CCS Grade B,heat number and certificate number all should be followed.   Chemical composition of Heat analysis for Shipbuilding steel plate CCS Grade B (Max %): C Si Mn  (Min) P S 0.21 0.35 0.80 0.035 0.035 Mechanical properties for Shipbuilding steel plate CCS Grade B: Yield strength (Mpa) Tensile strength (Mpa) Steel Mark 235 400-520 CCS/B