View Original Size
Precautions for Peanut Butter Grinding Machine installation:
1. The equipment should be installed on the flat concrete foundation and fixed with the ground screw (which is not fixed according to the gel grinding work).
2. Check whether the fastening screws are tightened (the rotor center screw is M12 left screw).
3. Use a special trigger to turn the rotor with a special trigger to check whether contact with the stator and whether or not the card is dead. If there is any such situation, the machine should not be turned on.
4. Check and connect the power cord (three-phase alternating current, voltage is 380 volts, body protection grounding) and note that the rotor rotation direction should be aligned with the arrow on the base.
5. Connect the cooling water and notice the water entry and exit signs of the nozzle.
6. When starting the motor, first click the switch to check for noise and vibration. If the situation is abnormal, it should stop immediately and try again after troubleshooting.
http://www.everfitfm.com/produts/nut/Peanut-Butter-Grinding-Machine.html
