Bridge Guardrail Railings, Fences, Beams

Bridge guardrails are a type of barrier used to separate lanes of vehicular traffic on bridges. They are designed to absorb impact and reduce the likelihood of serious injury or death if a collision were to occur. The main differences between bridge guardrails and other guardrails are that bridge guardrails are taller and wider than standard Type A guardrails, as they must protect against higher-velocity impacts due to their location on bridges. Regarding production and sale, bridge guardrails should comply with applicable local regulations and standards. Furthermore, they must be tested to confirm compliance before being put into production and sale.

The bridge railing guardrail is used along the bridges, viaducts and roads, finished with powder coating and zinc gavanizing.

Bridge guard railings are made of carbon steel, stainless steel or other base materials, supplied in various designs to meet specific grades and requirements.

There are 9 common bridge guardrail types:
1. W-Beam Guardrail – a standard highway guardrail with a w-shaped profile;
2. Cable Barrier – a flexible system of cables suspended between posts;
3. Beam Barrier – a pre-fabricated beam that can be installed quickly;
4. Thrie Beam Guardrail – three corrugations in a w-beam pattern for extra strength;
5. Post & Block System – posts and blocks used to mount guardrails;
6. Steel Railing – steel railing designed to deter vehicles from running off the road;
7. Crash Cushion – a flexible system designed to absorb impact;
8. Impact Attenuator – an impact absorbing device which reduces the forces transmitted after a vehicle collision;
9 Folding Guardrail – a collapsible guardrail designed to open up when hit, then reset itself.

Main types of bridge safety railings include Pipe railings, tube railings and Beam railings.

Pipe Railings: Galvanized Steel Pipe Fence for Bridges and Roads

Bridge railing barrier powder coated protected

Tube barriers: Bridge Guardrail Barriers, blue painted, square tubular fencing

W Beam Type Guardrails for Bridges

Steel beam elements for construction of bridges in the road network, flexible beam Railings double wave

Bridge Guard Railing Project Illustration

Bridges project in country road, of double wave beam Railings, hot-rolled structural steel 36 for railing with posts kind W6x15section of 1.11m.
Beam type guardrail, 3.81meter double-wave, with minimal thickness gauge steel 2.67mm, standadrd requirements of AASHTOM180, with hot-dip galvanizing for all connections with bolts, nuts and washers.
All posts shall be structural steel designation A 36, equivalent to AASHTOM 270 M designations Grade36, ASTMA 709 Grade 36 andM 183,with a minimum breaking strength of 4060kg/cm² and a mini mum yield strength of 2520kg/cm², Section I W6x15type(with wing 6 ") of L 1.11m.

Elements:
Beam rail DOUBLE WAVE, length 3.81m.
Terminal tail of duck (Baranda flexible beam), length 1.80m.
Galvanized metal post to flex beam guardrail, height 1.11m.