Concentrating Table
It is widely used in the selection of tungsten, molybdenum, plumbum, zinc, niobium and other rare metals and precious metal ores, but also can be used for the selection of iron, manganese ore and coal.
Shaking table is one of the important equipment of ore beneficiation. It is widely used in the selection of tungsten, molybdenum, plumbum, zinc, niobium and other rare metals and precious metal ores, but also can be used for the selection of iron, manganese ore and coal.
> Features
1. Stiffness and strength is big;
2. Low water absorption, no weight gain;
3. Good wear resistance of the working surface;
4. Resist chemical corrosion, be able to endure acid and alkali, don't avoid agentia in the mineral pulps ;
5. Good weather resistance, shape stability;
6. Good sorting performance ,stable indicators;
> Working principle of Concentrating Table:
Beneficiation process is going in the bed surface has reflex bar,mineral particle swarm is send from feed launder of bed surface,meanwhile,from transverse flushing water feed water tank mine shafts into the lateral flushing water, so the mineral particles in the power of gravity, transverse flow momentum ,inertia and friction that produced by bed doing the reciprocating asymmetrical movement ,stratified according to specific gravity and particle size, and do longitudinal movement along the bed and do lateral movement along the inclined bed. So the different mineral particles of ratio and size flow down along their own direction gradually along the diagonal present fan shaped , respectively, discharged from different area of concentrate and tailings side ,finally divided into concentrate, middling and tailings.
> Technical Data
Name
Coarse Sand Bed Surface
Fine Sand Bed Surface
Slime Bed Surface
Bed Surface Size
Length (mm)
4450
4450
4450
Drive End Width (mm)
1855
1855
1855
Concentrate End Width(mm)
1546
1546
1546
Maximum Feed Size (mm)
2
0.5
0.15
Feed Quantity (t/h)
30-60
10-20
15-25
Feed Concentration (%)
25-30
20-25
15-25
Route (mm)
16-22
11-16
8-16
Frequency ( t/s)
45-48
48-53
50-57
Bed Surface Transverse Slope(degree)
2.5-4.5
1.5-3.5
1-2
Separation Area (m2)
7.6
7.6
7.6
Bed Surface Section Shape
rectangle
sawtooth
triangle
Electric Power (kw)
1.1
1.1
1.1
Drive Type
Eccentric connecting rod mechanism
View Original Size
