Galvanized Welded Mesh Hardware Cloth

Welded mesh screen has flat even surface and welded firm structure, used for building materials, construction, fencing, agriculture, industry, mining, fishing, poultry, runway enclosures, draining rack, fruit drying screen,and other uses. Through high-precision processing, the end products of square or rectangular opening steel mesh hardware cloth is level, rust-resistant and flat with sturdy structure.

Galvanized and Hot Dipped Galvanized Welded Mesh, Square Hole Wire Mesh Industrial Screen Cloth, supplied in rolls or panels. Surface finishes can be Electro galvanized, hot dipped galvanized, PVC powder or enamel coated galvanized, and stainless steel. 

Material: 

Electro galvanized mesh(welded before galvanized, welded after galvanized)

Hot-dipped galvanized mesh(welded before galvanized, welded after galvanized)

PVC coated mesh(wire dia. of  PVC is about 0.4mm)

Galvanized welded mesh has a good resistance to corrosion. Zinc coating can reach 200g/m2.

Production treating:  

Hot dipped galvanizing after weaving

Weaving with hot dipped galvanized iron wire

Electric galvanizing after weaving

Weaving with electric galvanized iron wire

Galvanized then PVC coated

Concrete reinforcing bars. 

Advantages:

High intensity anti-high temperature.

Better strength and strong integration

Flat & even surface and strong structure

Anti-rust property

PVC Powder Coated or Painted Galvanized Welded Mesh Fence Panels:

Made of quality welded low carbon steel wire mesh galvanized before, then coated with PVC powder or PE powder. The coated layer is even,strong adhere siveness and bright luster with long live good anti-corrosive property. All kinds of colors can be coated according to customers' special requirements. Widely used as garden fence, playground fence and temporary control fence.

Welded Mesh Panels Used for Fabricating Wire Shelves, Rackings, Containers and Cages:

Welded steel mesh panels are popularly used for fabricating of various industrial mesh products, mainly:

Welded Mesh Shelves;

Wire Racks;

Wire Mesh Shelves;

Pallet Racks;

Wire Containers for Storages;

Security Lockers;

Security Cages and more.

Various sizes of panels are available for making custom size single or multi-layer chicken wire cages.

Technical Requirements for Making Chicken Wire Cage Panels:

The opening holes sizes are up to the eggs minor axis and the chicken feet sizes. The mesh grid should not be too close, otherwise, it will affect fecal leakage. Small hole cages will need more wire mesh material in manufacture and will also raise the cost of chicken wire cages.

Warp wire and weft wire diameter:

The bottom warp wire mesh spacing should not be greater than 2/3 of the minor axis of eggs 2/3, and generally 24 to 26 mm; weft spacing should not be greater than2/3 of the length of the chicken feet, should normally be less than 50 mm.

The bottom wire mesh panel is an important part of the chicken feeding cages, it will not only withstand the weight of the chicken, but also make eggs from hens easily rolled into the front tanks under the cages with no damages to the eggs. At the same time, the bottom wire mesh will allow majority of the stool leak into the ground, reducing wire mesh cages pollution. The mesh holes shall also ensure easy catching of the chicken wire, stable and comfortable standing and walking of the chicken.