HZ-4000T Cable Fault Locator Systerm

Introduction1. One trolley structure, convenient transportation.2. Without complex wiring, through the weak internal control of high voltage switch for automatic switch.3. For 220V - 220KV Power cable of low resistance, high resistance leakage fault, flashover failure for rapid positioning and fixed pointFeatures：1. Four gear test mode switch through the low voltage elv intelligent control.2. DC voltage up to 16KV.3.8/16KV,every voltage grade can reach the output of 1000J impact energy.Technical parameter1. test mode: the arc reflection method (multiple pulse), current sampling, the attenuation law (voltage sampling method), DC output.2.sampling signal types: arc reflection method (multiple pulse), current sampling, the attenuation law (voltage sampling method, low voltage pulse).3. DC high voltage output:0 ~ 16KV negative, maximum output current: 76mA0 ~ 8KV negative, maximum output current: 152mA4.Impact of capacitor: 0 ~ 16KV 7.5uF, maximum output energy:1000J0 ~ 8KV 30uF, maximum output energy:1000J5. the ball gap discharge: weak control of discharge period 3 - 12 seconds adjustable, and specially designed silencer, meet the beginning end of cable fault need to mute the requirements.6. protection:The position of zero voltage protection: to prevent error operation, the safeguard of the person and the tested product safety;According to the "off" button, the safety device is provided by the remaining charge, automatic release, guarantee the safety 7.selec the extension cable, can became a vehicle type cable fault location system.