Horizontal Splice Closure

Fiber Optic Horizontal Splice Closure Quick Details Place of Origin: Shenzhen, China (Mainland); Brand Name: OPTICO; Material: ABS or PC; Dimension (cm): 47*18*13; Cable Entry & Exit: 3 Entry 3 Exit; Maximum capacity: 96 cores; Price Terms: FOB Shenzhen 11~18USD/pcs; MOQ: 500pcs; Payment Terms: T/T, L/C, West unio 30% deposit, 70% balance before shipment; Production Time: 7~15 days after deposit; The fiber optic horizontal splice closure is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning. It ensures long-term reliability and usage under ambient temperature from -40°C to +75°C Dimension (CM): 47*18*13CM Cables Entry & Exit: 3Entry 3Exit Cable Diameter (mm): Φ7-Φ16 Sealing Structure: Sticky cincture or silicon gum material Sealing Material: ABS or PC Maximum capacity: 96 cores It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network; Components: Seal tape, Insulation tape, Nylon tie, heat shrinkable sleeve, metal hook, seal fittings,internal hexagonal spanner; Atmospheric pressure:70~106KPa Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period. Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure. Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation; Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over. Insulation resistance: ≥2X104MΩ