Unsaturated Polyester Resin Container

The unsaturated polyester resin is generally a linear polymer compound having an ester bond and an unsaturated double bond, which is obtained by polycondensation of an unsaturated dibasic acid diol or a saturated dibasic acid unsaturated diol. Usually, the polyester polycondensation reaction is carried out at 190 to 220°C until the desired acid value (or viscosity) is reached. After the end of the polyester polycondensation reaction, a certain amount of vinyl monomer is added while hot, and the mixture is made thick. Liquid, such a polymer solution is called unsaturated polyester resin. Main technical parameters of Unsaturated Polyester Resin Container Resin equipment Vertical fractionation column Vertical condenser Horizontal condenser Trap Specification(L) Specification (mm) Specification(m2) Specification (m2) Volume (L) Specification(mm) capacity(L) 50 ￠76×500 0.2 0.4 50 ￠200×250 10 100 ￠108×500 0.4 0.6 100 ￠250×300 15 200 ￠133×550 0.6 1 200 ￠350×400 40 300 ￠159×600 0.9 1.5 300 ￠400×450 60 500 ￠219×700 0.6 2.5 500 ￠450×450 75 1000 ￠273×800 1 4 1000 ￠450×500 85 1500 ￠273×850 1.5 6 1500 ￠500×500 100 2000 ￠325×1000 2 8 2000 ￠500×600 120 3000 ￠325×1000 3 12 3000 ￠600×650 200 5000 ￠377×1200 5 20 5000 ￠650×650 230 6000 ￠377×1200 6 25 6000 ￠650×700 250 8000 ￠426×1300 8 32 8000 ￠700×700 280 10000 ￠426×1500 10 40 10000 ￠800×1000 500 12000 ￠480×1600 10 48 12000 ￠800×1200 600 15000 ￠480×1800 12 60 15000 ￠900×1000 650 18000 ￠530×2000 15 72 18000 ￠1000×1200 1000 20000 ￠530×2000 15 80 20000 ￠1200×1200 1500 Note: 1) According to the different requirements of users, there are a variety of mixing methods (anchor, paddle, disc wheel, push, or box type agitation) to choose from. 2) There are five heating methods, including jacket heating, coil heating, electric heating, steam heating and heat transfer oil heating. 3) The user can selec the explosion-proof device, sealing device, positive pressure or negative pressure in the reactor. 4) With years of design and production experience, our technical engineers can design according to the special requirements of users.