Diamond Mesh Lath

Diamond metal lathing is ideal for fireproofing structure construction, with:
The uniform diamond opening and large open area provide a superior substrate for bonding of cementitious fireproof materials;
Rigid and flat sheets, bendable for box and contour design;
Square ends and smooth parallel edges on the sides for fast and easy handling;
Minimum stress cracks by maintaining consistent material depth.
 

1/4" Galvanized Diamond Mesh Lathe

Sheet size: 27" x 96"
Specification:
3.50 Pounds/Square Yard
Materials: Hot dipped galvanized steel sheets.

V Groove Self- Furring Diamond Mesh Lath

Diamond mesh lathe wire
Material: Zinc coated carbon steel
Weight: 1.75lbs, 2.51lbs, 3.4lbs, 3.5lbs
Self furred diamond mesh lath is made to be used over solid surfaces to be furred approximately ¼ inch away from the wall to allow for the proper behind the lath. Designed with a surface studded in dimples or embossed “V” groove that provide the required ¼ inch of furring.

Expanded Mesh Rib Lath Coils

Galvanised expanded coil mesh, in 100mm x 15m length, 150mm coil wdith x 30m length.
Opening: Diamond
For plastering back lathing

Expanded metal Sheet Diamond Mesh Lath

Expanded metal lath sheet
Self furring design
Specification: 0.5 mm. thickness
Mesh size 5.7 x 11.2 mm.
Supplied in 1x10 m / roll
Finished sheet in 7002500mm
For Thailand market

25x25mm Galvanized Expanded Metel Lath

Expanded metal Lath
Mesh pattern: Diamond hole
Opening : 25 X 25 MM
Wire Diameter : Ø 1.6 MM
Width : 1.2 M x Length : 30 M
Tensile Strength : 415 - 427 N/mm2
Elongation : 21 - 26 %
Coating Thickness : 100 - 120 GSM Coating
Paper backed
For Saudi Arabia market